Turnkey Products

Life Line (UV+UF)
CHILLING PLANT

We are specialized in offering Turnkey projects to our valuable clients.
These are manufactured under the guidance of experienced and technical team who developed them to perform efficiently.
We mainly take these projects for commissioning and installing both chilling plant and chilling water systems as well.
Reliable materials are used to fabricate them that are procured from reliable source.

FEATURES
  • Efficient working
  • High performance
  • Ergonomic design
  • Meets standard norms
  • High quality
  • Durable
  • Tough construction
USES
  • Training of people at site
  • Preparation of preliminary reports
  • Erection and commissioning
  • Framing technical specifications
  • Preparing drawing and site layouts
  • Design and manufacturing
  • Foundation drawings.

Cooling Towers are basically regarded as heat rejection devices that extract waste heat from the atmosphere through the cooling of water stream to a lower temperature.
They are bringing in use for air conditioning and indirect heat rejection equipment.
Drycool is known for supplying well appreciated towers by the customers globally.
Available in various models, these are appreciated for their durability and proficient working.

Features
  • Lightweight
  • Reduce noise
  • Low maintenance
  • High efficiency
  • Ergonomic design
  • Resist corrosion
  • Contamination free
  • Longer service life
  • Corrosion proof body
  • High rate of cooling
  • Avoid moist formation
  • Negligible piping cost
  • Less drift loss of water
  • Suitable for small industries
  • Resistant against strong wind
  • Leak proof and avoid water spillage
  • Simplified check up and maintenance job
  • Unique mechanism for water distributing section.
Life Line (UV+UF)
COOLING TOWER
Life Line (UV+UF)
AIR DRYER

Compressed Air Dryers are developed at our state-of-art manufacturing unit that is the ideal energy saver for production process.
The compressed air that leaves the compressor is saturated with moisture, dust and oil that are accountable for major problems.
They are known for reducing the amount of water vapor, liquid vapor and other hydrocarbon vapor present in compressed air.
Dry and clean air can be obtained with the use of compressed air.
Eliminate the moisture related problems in Drycool air dryerMoisture mainly react with chemical and contaminate the productCorrosion of pipe lines and pneumatic instrumentsMoisture form sticky emulsion with dirt, scale, oil and plug precisionMoisture is responsible for washing lubricants, thus increasing wear and tear REFRIGERATED AIR DRYER:- Having the support of an expert team, we have successfully developed Refrigerated Air Dryers.
These dryers worked on the principle of compressed air with saturated water vapor that enters the dryer's pre-cooling device.
This air is cooled down with outgoing cold air, thus reducing the load of the system.
This pre-cooled air enters the evaporator where heat gets released and is absorbed by the media reaching the pre-set temperature (2-4°C).
After cooling the vapor gets converted into droplets and is separated by steam separator and flows out of the dryer with the assistance of automatic drainer.
After that the cool air enters into pre-cooling device's shell side for exchanging heat.
This leaves the dryer to get heated upto the temperature of 10°C lower than that of inlet air.
The process of reheating is done for moisture condensation in the outside exit air pipeline.
It in-turn elevates the energy of air and improve effectiveness.
The next step is to filter out the solid dust of over 3µ in compressed air.

Features
  • Economical functioning
  • low power consumption
  • Innovative heat exchanger design
  • In-built safety devices
  • Aesthetic design
  • Consistent dew point
  • Easy to install
  • Inbuilt connection
  • High quality product.

M/S SHREE WATER TECH supplies and services all types of High Pressure from the world's leading suppliers, including: High pressure machine having three stage processes to compress the air as the application require more pressure to give better output.
These machines are having three to four numbers of cylinders with larger size of pistons.
It can generate maximum pressure up to 1000 PSIG (70 KG/CM2) We have range of 2 hp to 40hp different models to serve any pneumatics operation where it requires more pressure.
These machines mainly used in PET and Bottling Plants, Marine Industries, Beverages Industries and Plastic Process Plants.
Paper manufacturers, newspaper publishers, hospitals, laboratories, outpatient clinics, and many others depend on M/S SHREE WATER TECH for leading-edge vacuum products and services.

Life Line (UV+UF)
AIR COMPRESSOR
Life Line (UV+UF)
AIR HANDLING UNIT

In this write up, an energy-saving device is introduced into the air-handling unit (AHU).
Due to increases in energy costs, energy saving devices or systems have become the new preferred trend in tropical countries.
A primary cooling coil system is incorporated into the AHU to recycle the condensate water in order to achieve energy savings.
The warm outside fresh air is drawn through the primary cooling coil to recover the latent heat of condensate water.
The large temperature gradient between the warm fresh air and condensate water enlarges the amount of energy recovered.
This system is well applicable to primary AHU which serves primary air to the air-conditioning system.
The cost of installing the device is negligible but in returning long term saving.
Furthermore, the de-cooled condensate water can be drained off through non-insulated drain pipe.
The idea generation is discussed in the introduction.
Chapters 2 and 3 describe the preliminary calculation of the energy saving percentage.
Chapter 4 shows the detailed theoretical study of the development of the energy saving system.
This shows the viability of the idea.
Chapter 5 will recommend the design of the primary cooling coil configuration to achieve the desired cooling effect and energy saving strategy.
Lastly, the conclusion of the whole study is presented.

Contact us

  • Email: info@shreewatertech.com, shreewater123@gmail.com
  • Head Office Address:

    E-2B, Madhu Vihar, I.P Extension,
    Near Hasanpur Depot,
    Patparganj Indl. Area Delhi - 110092
ro care

Service and Complaint Call:
7042881317

For Any Query Call:
9599055404

© www.shreeWater tech.com , All Rights Reserved | Website Designed by: